Departure

Fields

Type

Description

Purpose

ID (subject identifier)

M

departure

GRAMMAR

subject name

M

Departure

GRAMMAR

subject type

M

process

GRAMMAR

Also known as

O

Vessel departure; gate out process

TIC Description

Definition

M

Departure is the process by which a carrier is physically leaving the terminal, after the terminal operations or third party services are completed.

Further Detail

O

Departure is a subprocess of CarrierVisit process.

Open

Departure “start” event occurs when a carrier has finished its “cargo-operations” or 3rd party services and it is “first time ready to departure” (see definition “firsttimecarrierreadyfordeparture”). The departure start process doesn't allow to work in the carrier anymore (cargo or 3rd party services).

Departure “end” event occurs when a carrier leaves the boundary of the Port activity. Usually this boundary is a physical border (port gate, barrier or geozone).

In case the physical port boundaries or process boundaries do not exist, the terminal borders (gate) act as the relevant boundary (as the terminal is always part of the port).

Open

Per carrier type:

Vessel:

• Departure.start is when firsttimecarrierreadyfordeparture: when the captain of the vessel indicates the departure procedure (gangway up, mooring, pilot, etc).

• Departure.end is at Start of Sea Passage (SOSP)

Truck:

• Departure.start once the truck is loaded/unloaded and no more loading/unloading operations have to be done (in that transfer area or another) and the truck starts the leaving procedure: secure the cargo, leaves the transfer area, go to the pregate or gate and exit the port.
  If the “output” of this event is not registered (driver confirmation, sensor detection, geofence), then an “ioutput” feedback (assumption) could be considered (in the moment the CHE or TOS confirms the last job is done).

• Departure.end is usually at the port gate or terminal gate (whatever comes last). If no port gates are present but a general port border or barrier exists, then Departure.end occurs when the carrier passes through the port border/barrier (geofence or access control).
  If no port boundaries exist at all, Departure.end will be when the truck passes the terminal pregate (OCR) or gate (whatever comes last).

Rail:

• Departure.start is when the train is already loaded or unloaded, the 3rd party services are finished and the operations to prepare the departure starts (brakes connection, machine connection or join/split wagons). This is determined either manually as an ouput data (e.g. “walk the train” to achieve readiness to departure) or if no data exists it could be considered as a feedback (ioutput) when cargo operations ends or after a time, assuming that the operations to departure start after some time the cargo operations were finished.

• Departure.end is when the train passes the gate or boundary of the port limits. If no such gate or boundary exists, it will be in the moment the train ends to exit the border of the terminal (e.g. the OCR gate).

TIC Description

Required Information

M

id, input, output

TIC Description

SUBJECT

line, service, servcevisit, cargo, carrier, carriervisit

CONCEPT

id, input, output, start, end, announcement, location

Related standards

O

 ISO 6346

TIC Description

Related TIC 4.0 definition

O

https://tic40.atlassian.net/l/c/3RUk3VuD https://tic40.atlassian.net/wiki/spaces/TIC40Definitions/pages/884474084 https://tic40.atlassian.net/wiki/spaces/TIC40Definitions/pages/884506865

Example

M

carriervisit.id = MLT1974

carriervisit.start.time.output.actual =2022-04-26T10:00:00.000Z

carriervisit.arrival.start.time.output.actual =2022-04-26T10:00:00.000Z

carriervisit.terminaloperations.start.time.output.actual =2022-04-26T10:30:00.000Z

carrierisit.arrival.end.time.output.actual =2022-04-26T11:00:00.000Z

cargovisit.inbound.time.output.actual =2022-04-26T11:00:00.000Z

carriervisit.cargooperations.start.time.output.actual =2022-04-26T11:10:00.000Z

carriervisit.cargooperations.end.time.output.actual =2022-04-26T18:00:00.000Z

cargovisit.outbound.time.output.actual =2022-04-26T18:30:00.000Z

carriervisit.departure.start.time.output.actual =2022-04-26T18:30:00.000Z

carriervisit.terminaloperations.end.time.output.actual =2022-04-26T18:40:00.000Z

carrierisit.departure.end.time.output.actual =2022-04-26T19:00:00.000Z

carrierisit.end.time.output.actual =2022-04-26T19:00:00.000Z

Example in the context of the grammar

M

see below the complete JSON data model

Link to one or more operational processes

M

Search tags

M

arrival, carrier, carriervisit, departure, inbound, outbound, cargooperations, anchorage, drift, pilot, towage, mooring, portgate, terminalgate, pregate

Version / Date

M

2022.004 - 01/05/2022

Internal TIC Version

M

20230313