TIC 4.0

Warning

Owned by Francisco Blanquer Jaraiz
Last updated: ene 14, 2022
3 min read

CONCEPT

Fields

Type

Description

Purpose

Fields

Type

Description

Purpose

ID (Concept identifier)

M

warning

GRAMMAR

Concept name

M

Warning

GRAMMAR

Concept type

M

status

GRAMMAR

Also known as

O

Alarm, Caution, Advice

TIC Description

Definition

M

Warning is a condition in which the subject is close to fail on a required function, or a certain condition is not met to function normally, relevant to effect decision making over subject.

TIC Description

Further Detail

O

Attention, you may have to adjust your decision making or else you could run into a problem or a fault or an interlock condition will persist.

TIC Description

Required Information

M

SUBJECT; OBSERVED PROPERTY and VALUE

TIC Description

SUBJECT

M

Health

GRAMMAR

POINT OF MEASUREMENT

O

ioutput

estimated; actual; performed

GRAMMAR

OBSERVED PROPERTY

M

status; duration; level; counter; timer; totalcounter; totaltimer

GRAMMAR

Value

M

tic40codeid = to be developed for 2022.005
tic40codename = to be developed for 2022.005
mcode = Manufacturer Code
spncode = The Suspect Parameter Number (SPN) is diagnostic fault code terminology found on some Caterpillar ® products using a J1939 CAN data link.
fmicode = Failure Mode Identifier (FMI) Codes on J1939 data link
severity = Determine how serious each effect is.
description = human comprehensive description of the code
reaction = human comprehensive description of the consecuences

GRAMMAR

Related standards

O

J1939

TIC Description

Related TIC 4.0 definition

O

https://tic40.atlassian.net/l/c/pBWAiKtghttps://tic40.atlassian.net/l/c/sHgs2815 https://tic40.atlassian.net/l/c/jCkb1RZA ErrorMessage https://tic40.atlassian.net/l/c/u01CZGna Interlock

TIC Description

Example

M

In flat format for a specific "timestamp": "2021-11-19T16:06:54.891Z", we receive this message:

  • che.health.heallthy.status.boolean : TRUE

  • che.health.fault.status.boolean : FALSE

  • che.health.warning.status.boolean: TRUE

  • che.health.warning.status.tic40codeid: 1.1

  • che.health.warning.event.tic40codeid: 1.1.4.45

  • che.health.warning.event.tic40codename: che.powersource.transmission.operatorpresence

  • che.health.warning.event.description: Operator is not seated and shift lever is NOT in Neutral and/or parking brake is NOT activated. Shift lever to neutral or apply parking brake.

  • che.health.warning.event.description: Transmission stay neutral

In this example the CHE transmission is in neutral because the operator is not in his operator position (safety requirement) and the machine is sending out a warning upon which the operator can act, but the health status of the machine itself is ok.

Another more human readable example would be: an engine is close to overheat it’s coolant temperature, hence the CHE sends out a warning per TIC 4.0. This could facilitate the planning of the maintenance of the cooler cleaning.

 

TIC Description

Example in the context of the grammar

M

Healthy problem with a simple fault data model in JSON format

{ "che": [ { "id": "", "name": "", "health": [ { "id": "", "name": "", "number": 0, "type": "", "family": "", "brand": "", "model": "", "source": "", "softwareid": "", "location": "", "healthy": { "status": [ { "value": true, "type": "operational", "pom": "output", "pomt": "actual", "timestamp": "2021-11-19T16:06:54.891Z" }, { "value": true, "type": "component", "pom": "ioutput", "pomt": "estimated", "timestamp": "2021-11-19T16:06:54.891Z", "computingtime": "2021-11-19T16:06:54.891Z", "forecasttime": "324", "forecasttimeunit": "second" } ], "level": [ { "value": "100", "type": "component", "unit": "percentage", "pom": "output", "pomt": "actual", "timestamp": "2021-11-19T16:06:54.891Z" }, { "value": "34", "type": "operational", "unit": "errors", "pom": "output", "pomt": "actual", "timestamp": "2021-11-19T16:06:54.891Z" }, { "value": "95", "type": "component", "unit": "percentage", "pom": "ioutput", "pomt": "estimated", "timestamp": "2021-11-19T16:06:54.891Z", "computingtime": "2021-11-19T16:06:54.891Z", "forecasttime": "324", "forecasttimeunit": "second" } ] }, "warning": { "event": [ { "tic40codeid": "1.1.4.45", "tic40codename": "che.powersource.transmission.operatorpresence", "pom": "output", "pomt": "actual", "timestamp": "2021-11-19T16:06:54.892Z", "unit": "boolean", "oldvalue": false, "newvalue": true, "mcode": "tE600", "spncode": , "fmicode": , "severity": {}, "description": {}, "reaction": {} } ], "status": [ { "tic40codeid": "1.1", "tic40codename": "che.powersource", "pom": "output", "pomt": "actual", "timestamp": "2021-11-19T16:06:54.892Z", "value": true, "mcode": "E", "spncode": , "fmicode": , "severity": {}, "description": {}, "reaction": {} } ], "duration": [ { "tic40codeid": "1.1", "tic40codename": "che.powersource", "pom": "output", "pomt": "actual", "unit": "second", "timestamp": "2021-11-19T16:06:54.892Z", "value": 1, "mcode": "E", "spncode": , "fmicode": , "severity": {}, "description": {}, "reaction": {} } ], "counter": [ { "tic40codeid": "1.1.", "tic40codename": "che.powersource", "pom": "output", "pomt": "actual", "timestamp": "2021-11-19T16:06:54.892Z", "value": 32, "starttimestamp": "2021-11-19T16:05:54.892Z", "endtimestamp": "2021-11-19T16:06:54.892Z", "mcode": "E", "spncode": , "fmicode": , "severity": {}, "description": {}, "reaction": {} } ], "totalcounter": [ { "tic40codeid": "1.1", "tic40codename": "che.powersource", "pom": "ioutput", "pomt": "actual", "timestamp": "2021-11-19T16:06:54.892Z", "value": 347, "mcode": "E", "spncode": , "fmicode": , "severity": {}, "description": {}, "reaction": {} } ], "timer": [ { "tic40codeid": "1.1.2.4.3", "tic40codename": "che.powersource", "pom": "output", "pomt": "actual", "unit": "second", "timestamp": "2021-11-19T16:06:54.892Z", "value": 63, "starttimestamp": "2021-11-19T16:05:54.892Z", "endtimestamp": "2021-11-19T16:06:54.892Z", "mcode": "E", "spncode": , "fmicode": , "severity": {}, "description": {}, "reaction": {} } ], "totaltimer": [ { "tic40codeid": "1.1", "tic40codename": "che.powersource", "pom": "output", "pomt": "actual", "unit": "hour", "timestamp": "2021-11-19T16:06:54.892Z", "value": 4.32, "mcode": "E", "spncode": , "fmicode": , "severity": {}, "description": {}, "reaction": {} } ] } } ] } ] }

TIC Description

Link to one or more operational processes

M

 

TIC Description

Search tags

M

 

Technical

Version / Date

M

2021.003 - 15/01/2022

Technical

Internal TIC Version

M

2021213

Technical

M = Mandatory

O = Optional

Created by

Edited by

Review / Approve

Published

 @Francisco Blanquer Jaraiz 2021-11-15

 @Francisco Blanquer Jaraiz 2021-12-13 

 

 

 

  @Luisa Kempf

Dec 15, 2021

 

 

 

 

 

 

 

 

 

© Copyright - TIC 4.0 All rights reserved | Design web by Fundación Valenciaport