Comparación de páginas

ID (Concept identifier)

M

readytodeliver

GRAMMAR

Concept name

M

Ready To Deliver

GRAMMAR

Concept type

M

action

GRAMMAR

Also known as

O

At POW with cargo, at row with cargo, under RTG with cargo, waiting for equipment with cargo, At Yard to Deliver (AYTD), At Vessel to Deliver (AVTD)

TIC Description

Definition

M

Concept (status) that describes the action that is going to perform be performed by the subject (CHE) to execute an order (action type cargo), at the “laden” end location (end position of the cargo) to drop the cargo. It starts when the subject (CHE) arrives at the end location of the cargo and ends when the cycle ends the laden phase (the cargo is delivered or dropped). Usually, this action is related to the unlocking activities (hoist down and spreader unlocking).

TIC Description

Further Detail

O

The start of Ready To Deliver is the end of the Moving To Deliver or Queuing To Deliver activities and the end is just when the cargo is unlocked the first time.

Specific cases, from the equipment point of view:

• STS Load: The Ship-to-shore spreader stays (CHE not driving or trolleying) with cargo (locked spreader) at the location where it has to drop the cargo, which is usually is the carrier bay and row. Usually, the CHE performs some activities to pick up the cargo (hoist, small trolley and spreader movements). In case there are different subjects (two trolleys or two orders for the same machineSTS) like for multi-trolley operations the pick drop location could be the pinning/interchange platform and the transfer zone (it depends on the subject). So we recommend defining the subject by trolley and not by CHE.

• STS Discharge: The Ship-to-shore spreader stays (CHE not driving or trolleying) with cargo (locked spreader) at the location where it has to drop the cargo, which is usually the transfer zone. The CHE performs some activities to pick up the cargo (hoist, small trolley and spreader movements). In case there are different subjects (two trolleys or two orders for the same machineSTS) like for multi-trolley operations the pick drop location could be the pinning/interchange platform and the transfer zone (it depends on the subject).

• TT/AGV: The Terminal Tractor or AGV platform stays (idle or working) with cargo (slot locked) within the transfer area, after the Moving To Deliver or Queuing To Deliver activities. Usually, the TT needs to do the alignment and the idling to facilitate the operation till until the container is placed or lifted from the platform.

• RTG/RMG/ARMG/ASC: The gantry crane or ASC spreader stays (idle or working) with cargo (locked) within the transfer area or cargo location, after the Moving To Deliver or Queuing To Deliver activities. This area is always over the cargo or carrier slots where the cargo should be dropped (unlocked).

• SC/SHC: The Straddle Strad or Shuttle Carrier spreader stays (idle or working) with cargo (locked) within the cargo location where it has to be dropped off (unlocked).

TIC Description

Required Information

M

SUBJECT; OBSERVED PROPERTY and VALUE

TIC Description

SUBJECT

M

order; che,

GRAMMAR

POINT OF MEASUREMENT

O

pom: output

pomt: actual, estimated

GRAMMAR

OBSERVED PROPERTY

M

status, duration, counter, totalcounter, timer, totaltimer, starttimestamp, endtimestamp

GRAMMAR

Value

M

boolean

GRAMMAR

Related standards

O

TIC Description

Related TIC 4.0 definition

O

https://tic40.atlassian.net/l/cp/4Q1bj1tt https://tic40.atlassian.net/l/cp/hLw2PTh0Moving To Collect Queuing To Collect Ready to Collect Collect Deliver Moving To Deliver Queuing to Deliver Ready to Deliver

TIC Description

Example

M

A message from the TOS with that which confirms the job-step status of the terminal truck 01 from the perspective of the order, che and driver:

tos.@.jobinstruction.@.oderorder.@2343.movingtocollect.status.output.actual.value: FALSE.

tos.@.jobinstruction.@.oderorder.@2343.queuingtocollect.status.output.actual.value: FALSE

tos.@.jobinstruction.@.oderorder.@2343.readytocollect.status.output.actual.value: FALSE

tos.@.jobinstruction.@.oderorder.@2343.movingtodeliver.status.output.actual.value: FALSE

tos.@.jobinstruction.@.oderorder.@2343.queuingtodeliver.status.output.actual.value: FALSE

tos.@.jobinstruction.@.oder.@2343.readytodeliver.status.output.actual.value: TRUE

tos.@.jobinstruction.@.oderorder.@2343.che.output.actual.id: TT01

Optionally the information could be duplicate duplicated under the “che” subject. If there are many a lot of elements in the che array then and subsequently in the same message then it is mandatory recomended to use the array identification after the “id”

tos.@.che.@TT01.movingtocollect.status.output.actual.value: FALSE

tos.@.che.@TT01.queuingtocollect.status.output.actual.value: FALSE

tos.@.che.@TT01.readytocollect.status.output.actual.value: FALSE

tos.@.che.@TT01.movingtodeliver.status.output.actual.value: FALSE

tos.@.che.@TT01.queuingtodeliver.status.output.actual.value: FALSE

tos.@.che.@TT01.readytodeliver.status.output.actual.value: TRUE

TIC Description

Example in the context of the grammar

M

TIC Description

Link to one or more operational processes

M

All the jobinstructions type cargo move.

https://tic40.atlassian.net/l/cp/4Q1bj1tt https://tic40.atlassian.net/l/cp/hLw2PTh0

TIC Description

Search tags

M

laden #laden at row, wait#wait, waiting#waiting

Technical

Version / Date

M

2023.007 - 25/0302/2023

Technical

Internal TIC Version

M

20230227

Technical