Fields | Type | Description | Purpose |
|---|---|---|---|
ID (Concept identifier) | M | Load | GRAMMAR |
Concept name | M | Load | GRAMMAR |
Concept type | M | Load (to be added to concept type list/Check) | GRAMMAR |
Also known as | O | cargo weight; payload | TIC Description |
Definition | M | The amount of weight carried by the subject | TIC Description |
Further Detail | O | The load (weight) carried by cargo handling equipment normally in tonnes (but other weight units of measure are also accepted, metric or imperial). The scope is limited to cargo movements within the terminal operational area. We are using Load instead of Cargo to avoid confusion between “weight” that is an observed property and the “cargo” itself that is a unit. Exclusions - Loads that are exerted onto the ‘ground’ by equipment or rail lines (to be defined ‘civil load’ - as defined by civil engineering industry and standards). Also not the action of loading (verb), e.g. to load a truck or unload a vessel. Examples (exclusions):-
Sub-concepts related to load - Static:
Dynamic-
| TIC Description |
Required Information | M | SUBJECT; OBSERVED PROPERTY and VALUE | TIC Description |
SUBJECT |
| #CHE; #STS; #SC; #RTG; #RMG; #TT; #FL; #MHC; #POW (Point of Work). |
|
POINT OF MEASUREMENT |
| #spreader; #hook; #twistlock;#hoisting_motor;#loadcell (may be implied by process/handover and not measured directly) |
|
OBSERVED PROPERTY |
| #value |
|
Value |
| real number; true; false. |
|
Related standards | O |
| TIC Description |
Related TIC 4.0 definition | O |
| TIC Description |
Example | M | Measurement of the load under the equipment is higher than the safe working load. Status = false. Measurement of the load under the equipment is lower than the safe working load. Status = true.
| TIC Description |
Example in the context of the process | M | STS01; LOAD_GROSS and 40Tonnes The gross load on STS01 is 40 Tonnes. RTG01; LOAD_NETT and 20Tonnes The nett load on RTG01 is 20 Tonnes.
| TIC Description |
Link to one or more operational processes | M | Move; Cycle. | TIC Description |
Search tags | M | load;cargo_load;safe_working_load | Technical |
Version / Date | M | TIC_Q4_2020 / 03.12.2020 | Technical |
Internal TIC Version | M | definition technical group | Technical |
M = Mandatory
O = Optional
JSON:
XML:
MQTT:
Created by | Edited by | Review / Approve | Published |
|
|
|
|
|
|
|
|
LikeBe the first to like this
No labels
1 Comment
Francisco Blanquer Jaraiz
I think it is my fault. Load it is not a concept or a subject it is an observed property. The concept should be net, gross, design, etc.
che_net_output_load_ton: 7
che_spreader_net_output_load_ton: 7
che_hoist_net_output_load_ton: 7
che_twislock_net_output_load_ton:7
Cargo is the subject; cargo_size, cargo_weight, cargo_load?
. perhaps the better idea is to use “weight” instead of “load”
che_cargo_net_output_weight_ton | CHE | cargo | net | output | weight | ton |
che_cargo_gross_output_weight_ton | CHE | cargo | gross | output | weight | ton |
che_cargo_design_value_ton | CHE | cargo | design |
| weight | ton |
che_traction_front_gross_output_weight_ton | CHE | traction_front | gross | output | weight | ton |
che_traction_front_gross_output_weight_% | CHE | traction_rear | gross | output | weight | % |
che_traction_front_gross_output_weight_ton | CHE | traction_front | gross | output | weight | ton |
che_traction_front_gross_output_weight_% | CHE | traction_rear | gross | output | weight | % |