...

SUBJECT

{ "msg": { "id": "", "sender": "", "timestamp": "2021-08-30T13:07:48.499Z", "topic": "", "destinantion": "", "creationtimestamp": "2021-08-30T13:07:48.499Z", "starttimestamp": "2021-08-30T13:07:48.499Z", "endtimestamp": "2021-08-30T13:07:48.499Z", "version": "2021.2" }, "che": [ { "id": "", "cycle": [ { "id": "CYCLE Start and End:
Any process has a start and an end, even if it is a semicontinuous process like a conveyor belt for bulk handling cargo.

A subject can execute cycles in paralel (many at the same time like a terminal with several STS) or in serial (just one after the other like a classical CHE). The paralell cycles are built by several serial cycles. A serial cycle can also be built with several subprocess running in serial independently like a double trolley STS where a cycle can be started (trolley seaside) before the previuous one is ended (trolley landside).

The “basic cycle” is the one that only can be performed once the previous one is ended, any other type of cycle is just an aggregation of these basic cycles (parallel or multiple serial independent ones). This basic cycle is the most common one we can find. For example in the case of a CHE, the new CHE.CYCLE starts when the previous one is ended and not just when the CHE picked up the payload.

The “parallel cycle” (several basic cycles working in parallel) is the most common in big systems like a “terminal” or a “yard” or a “gate” where several CHE are working in parallel.

The cycle will have the “start” when the process to move the payload begins. This happens when the subject starts to execute the process to pickup the payload (usually when the che or terminal start to execute the process to pickup a cargo = unladen subprocessof cycle as per definitionbelow) and finishes when the subject delivers the payload (usually when the che or the terminal unlock or deliver to the carrier the cargo).

CYCLE Agregation

The perimeter of the cycle agregation always depends on the subject. The cycle of a subject is not the sum of all its subsubject cycles. Therefore, the terminal.cycle.move.box is not the sum of all its che.cycle.move.box.

The simplest example is a CHE with just a basic cycle, which only has one trolley and one spreader. The che.cycle and the che.spreader.cycle or the che.trolley.cycle is the same as there is only one spreader and one trolley. Only for this case the sum of the trolley cycle is the same as the che cycle.

If the subject contains various cycles, it is not basic. Then to build the subject cycle, only the cycles of some sub-subjects need to be aggregated.

Example: To calculate the terminal.cycle.move.box (ended) all che.cycle.move.box (loading) of any machine that is loading a carrier (vessel, truck, traing etc) have to be agregated. This means that only the subsubject in charge of the subject.cycle.move “end” process must be added, in the case of the terminal the machines that load the carriers. In the case of a multitrolley CHE the trolley that loads the carrier or CHE (discharging the land trolley, and loading the seatrolley) need to be added.

CYCLE Payload

Payload includes any relevant payload: cargo, special moves, cages, twislocks boxes, hatchcovers, etc.

If it is required to filter by an specific payload, this can always be done. Also the specific value of subject.cycle.move.counter (box, teu, etc) can be added.

CONCEPTs for CYCLE:
The cycle is a process compatible with concepts such as: Id, loading, discharging, useful, unuseful, paid, unpaid, handling reason, move, load, energy, start, end, laden, unladen, active, inactive, idle, working, etc. This allows to agregate a lot of concepts per cycle and to make a one to one (1:1) relation between those concepts and the specific cycle.

A cycle also can have a link with other subjects like cargo, cargovisit, carrier, and carriervisit. This link can be made one to several (1:n) with an array of subject id.

Example: if a cycle has moved one container the the relation between cycle and container can be expressed as follows:

Fields

Type

Description

Purpose

ID (Concept identifier)

M

cycle

GRAMMAR

Subject Name

M

Cycle

GRAMMAR

Subject Type

M

Process

GRAMMAR

Also known as

O

CHE cycle; move; working cycle; working process

TIC Description

Definition

M

A Cycle characterises is a discrete process that involves a subject (CHE or any subsubject like trolley, spreader; also valid for TOS cycles) when moving a payload (which can be aggregated into different units) (individually, separate and distinct) process designed (destinated) to move payloads from one location to another .by a subject (che, tos, terminal, carrier, etc)

TIC Description

Further Detail

O

A single CYCLE can be described as the sum of numerous subject Moves.

The subject Cycles are always related to the subsystems of the subject (i.e. spreader of the STS, RTGs of the Yard, and STSs of the Berth). A complete subject Cycle of one subsystem starts when the previous one finishes (it is cyclical), and finishes when the cargo is completely released from the considered sub-system (realise from realise). Thus, the job of the subsystem is done and the next job is ready to start (e.g. for an STS the spreader has all twistlocks open and starts the next job. For a Yard, when the RTG or the SC releases the container in the yard or takes out the container and releases it on the TZ).

Laden and Unladen cycle

A normal working discrete process always has two subprocesses, one with cargo that represents the Laden Cycle and another without cargo that represents the Unladen Cycle.

The normal working Cycle (not starting or finishing with an OFF status) will start with the start (begining) of the unladen cycle and finish with the end of Laden cycle.

An unladen cycle describes the process or movements of a subject (normally a CHE) without cargo payload(s).

A laden cycle describes the process or movements of a subject (normally a CHE) with cargo payload(s).

Cycle live:
A cycle starts when the subject turns ON or ends the previous cycle and a cycle ends when the subject turns OFF or finish the job was designed for (safely unlock the payload that has been moved)

Could happen that a cycle does not move anything, because the subject just turns ON and then OFF.

Concepts for CYCLE:
Cycle is a process with many concepts compatible with: Id, loading, discharging, useful, unuseful, paid, unpaid, handling reason, move, load, energy, start, end, laden, unladen, active, inactive, idle (nothing to do and not work instruction) , working (doing something che.working.status: true, or with a work instruction).

A cycle also can have a link with other process: cargo, cargovisit, carrier, and carriervisit.

TIC Description

Required Information

M

CONCEPT; OBSERVED PROPERTY and VALUE

TIC Description

SUBJECTS

#che; #tos

CONCEPT

#Id; #loading; #discharging; #useful; #unuseful; #paid; #unpaid; #handling reason; #move; #load; #start; #end; #energy; #laden; #unladen; #active; #inactive; #idle; #working.

Related standards

O

TEU definition; Container definition; ISO 8601

TIC Description

Related TIC 4.0 definition

O

https://tic40.atlassian.net/l/c/3pujAL8E https://tic40.atlassian.net/l/c/uF2W63Ut https://tic40.atlassian.net/l/c/0X0Ad1XR Laden; Unladen; Paid; Unpaid; Useful; UnUseful; https://tic40.atlassian.net/wiki/spaces/REV/pages/420643176/Single+Review?atlOrigin=eyJpIjoiZDAyMDQ3MmEyZTMwNGM2ODk2YTBjZjJkMmNmNzE4ZTUiLCJwIjoiYyJ9 https://tic40.atlassian.net/l/c/0yoXXmak https://tic40.atlassian.net/l/c/rSFwbtAG https://tic40.atlassian.net/l/c/UXknxhhc; Hatchcover; Lashing cage; Breakbulk; Bundle; Gearbox; CHain; OHF; double Spreader; Doule trolley; solid bulk; double Boom; Multitrolley.

TIC Description

Example

M

see below diagrams and draws

TIC Description

Example in the context of the grammar

M

Bloque de código

language	json

Bloque de código
"cargo": [ { "timestamp": "2021-09-27T08:17:03.471Z", "id": "ISO 6346" } ],

CHE.CYCLE

On & Off

The che.cycle is the cycle performed by a CHE. So the subject has the ability to turn ON and OFF. Due to this particularity it is considered that the process to move payloads will always start with the turn ON of the CHE and end with the turn OFF of the CHE.

Therefore the serial basic CYCLE starts when the subject turns ON or the previous cycle ended and a CYCLE ends when the subject turns OFF or finishes the job it was designed for (safely unlock the payload that has been moved).

It could happen that a cycle does not move anything, because the subject just turns ON and then OFF. A CYCLE is a process “designed” to move a payload. In some cases, the cycle does not necessarily have to move a payload. When there is a payload involved in the cycle, this cycle will have a move.value (=1), if there is no payload involved then this cycle will have a move.value (=0).

Laden and Unladen subprocesses of a cycle

The “basic cycle” always has two subprocesses, one with cargo that represents the Laden subprocess and another without cargo that represents the Unladen subprocess.

Usually the “basic cycle” (not starting or finishing with an OFF status) will start with the start (begining) of the unladen subprocess and finish with the end of Laden subprocess.

An unladen cycle just describes the basic cycle process of a subject (normally a CHE) performs without a payload(s).

A laden cycle describes the basic cycle process of a subject (normally a CHE) with a payload(s).

The Laden and Unladen subprocess also have and start and end.

See diagram below for more details.

Terminal.CYCLE

Pending 2022.003 release

TOS.CYCLE

Pending 2022.004 release

TIC Description

Required Information

M

SUBJECT, CONCEPT; OBSERVED PROPERTY and VALUE

TIC Description

SUBJECTS

#che; #tos; #terminal; #berth; #gate; #rail

CONCEPT

#Id; #loading; #discharging; #useful; #unuseful; #paid; #unpaid; #handling reason; #move; #load; #start; #end; #energy; #laden; #unladen; #active; #inactive; #idle; #working.

Related standards

O

TEU definition; Container definition; ISO 8601

TIC Description

Related TIC 4.0 definition

O

https://tic40.atlassian.net/l/c/3pujAL8E https://tic40.atlassian.net/l/c/uF2W63Ut https://tic40.atlassian.net/l/c/0X0Ad1XR Laden; Unladen; Paid; Unpaid; Useful; UnUseful; https://tic40.atlassian.net/wiki/spaces/REV/pages/420643176/Single+Review?atlOrigin=eyJpIjoiZDAyMDQ3MmEyZTMwNGM2ODk2YTBjZjJkMmNmNzE4ZTUiLCJwIjoiYyJ9 https://tic40.atlassian.net/l/c/0yoXXmak https://tic40.atlassian.net/l/c/rSFwbtAG https://tic40.atlassian.net/l/c/UXknxhhc; Hatchcover; Lashing cage; Breakbulk; Bundle; Gearbox; CHain; OHF; double Spreader; Doule trolley; solid bulk; double Boom; Multitrolley.

TIC Description

Example

M

see below diagrams and draws

TIC Description

Example in the context of the grammar

M

CHE.CYCLE

Bloque de código

language	json

{
  "msg": {
    "id": "",
    "sender": "",
    "timestamp": "2021-09-29T13:28:37.417Z",
    "topic": "",
    "destination": "",
    "creationtimestamp": "2021-09-29T13:28:37.417Z",
    "starttimestamp": "2021-09-29T13:28:37.417Z",
    "endtimestamp": "2021-09-29T13:28:37.417Z",
    "version": "2021.1"
  },
  "che": [
    {
      "id": "",
      "cycle": [
        {
          "id": "",
          "loading": false,
          "discharging": false,
          "usefull": false,
          "unusefull": false,
          "paid": false,
          "unpaid": false,
          "handlingreason": "",
          "move": {
            "counter": [
              {
                "pom": "output",
                "pomt": "actual",
                "timestamp": "2021-09-29T13:28:37.418Z",
                "starttimestamp": "2021-09-29T13:28:37.418Z",
                "endtimestamp": "2021-09-29T13:28:37.418Z",
                "value": 1,
                "box": 1,
                "teu": 2,
                "20foot": 0,
                "30foot": 0,
                "40foot": 1,
                "45foot": 0,
                "single": 1,
                "twin": 0,
                "double": 0,
                "tandem": 0,
                "quad": 0,
                "hatchcover": 0,
                "lashingcage": 0,
                "breakbulk": 0,
                "bundle": 0,
                "gearbox": 0,
                "ohf": 0
              }
            ],
            "totalcounter": [
              {
                "pom": "output",
                "pomt": "actual",
                "timestamp": "2021-09-29T13:28:37.418Z",
                "value": 0,
                "box": 0,
                "teu": 0,
                "20foot": 0,
                "30foot": 0,
                "40foot": 0,
                "45foot": 0,
                "single": 0,
                "twin": 0,
                "double": 0,
                "tandem": 0,
                "quad": 0,
                "hatchcover": 0,
                "lashingcage": 0,
                "breakbulk": 0,
                "bundle": 0,
                "gearbox": 0,
                "ohf": 0
              }
            ],
            "volume": [
              {
                "pom": "output",
                "pomt": "actual",
                "timestamp": "2021-09-29T13:28:37.418Z",
                "unit": "m3",
                "value": ""
              }
            ]
          },
          "weight": {
            "gross": [
              {
                "pom": "output",
                "pomt": "actual",
                "timestamp": "",
                "starttimestamp": "2021-09-29T13:28:37.418Z",
                "endtimestamp": "2021-09-29T13:28:37.418Z",
                "unit": "ton",
                "value": 0
              }
            ],
            "totalgross": [
              {
                "pom": "output",
                "pomt": "actual",
                "timestamp": "",
                "unit": "ton",
                "value": 0
              }
            ],
            "net": [
              {
                "pom": "output",
                "pomt": "actual",
                "timestamp": "",
                "starttimestamp": "2021-09-29T13:28:37.418Z",

"loading":

false,

"endtimestamp": "2021-09-29T13:28:37.418Z",

"discharging":

false,

usefull

unit":

false

"ton",

"unusefull":

false,

     "value": 0

"paid":

false,

"unpaid":

false,

],

"handlingreason":

"",

move

totalnet": [

{

"counter":

[

{

"pom": "output",
                "

pom

pomt": "

output

actual",
                "

pomt

timestamp": "

actual

",
                "

timestamp

unit": "

2021-08-30T13:07:48.499Z

ton",
                "

starttimestamp

value":

"2021-08-30T13:07:48.499Z",

 0
              }

"endtimestamp": "2021-08-30T13:07:48.499Z",

 ]
          },

"value":

1,

    "energy": {
            "

box

consumed":

1,

[
              {

"teu":

2,

20foot

pom":

0

"output",
                "

30foot

pomt":

0

"actual",
                "

40foot

name":

1

"electric",
                "

45foot

starttimestamp":

0

"2021-09-29T13:28:37.418Z",
                "

single

endtimestamp":

1

"2021-09-29T13:28:37.418Z",
                "

twin": 0

timestamp": "2021-09-29T13:28:37.418Z",
                "

double

unit":

0

"kwh",
                "

tandem

value": 0

,

"quad": 0

},
              {

"hatchcover":

0,

lashingcage

pom":

0

"output",
                "

breakbulk

pomt":

0

"actual",
                "

bundle

name":

0

"fuel",
                "

gearbox

starttimestamp":

0

"2021-09-29T13:28:37.418Z",

}

"endtimestamp": "2021-09-29T13:28:37.418Z",

],

totalcounter

timestamp":

[ {

"2021-09-29T13:28:37.418Z",

pom

unit": "

output

liters",
                "

pomt

value":

"actual",

"timestamp": "2021-08-30T13:07:48.499Z"

},
              {

"value": 0,

box

pom":

0

"output",
                "

teu

pomt":

0

"actual",
                "

20foot

name":

0

"fuel",
                "

30foot

starttimestamp":

0

"2021-09-29T13:28:37.418Z",
                "

40foot

endtimestamp":

0

"2021-09-29T13:28:37.418Z",
                "

45foot

timestamp":

0

"2021-09-29T13:28:37.418Z",
                "

single

unit":

0

"kilogram",
                "

twin

value": 0

,

"double": 0,

}
            ]

"tandem":

0,

},

quad

start":

0,

{
            "

hatchcover

time":

0,

[
              {

"lashingcage": 0,

breakbulk

pom":

0

"output",
                "

bundle

pomt":

0

"actual",
                "

gearbox

timestamp":

0

"2021-09-29T13:28:37.418Z",

}

  "computingtime": "2021-09-29T13:28:37.418Z",

],

"volume

"forecasttime":

[

""

{

"pom": "output",

 ],
            "

pomt

location":

"actual",

timestamp

logical":

"2021-08-30T13:07:48.499Z",

[
                {

"unit":

"m3",

value

pom": "ioutput",

}

    "pomt": "actual",

]

}

"qualifier": "yard",

"start": {

time

timestamp":

[

"2021-09-29T13:28:37.419Z",

{

"pom": "output

"value": "Y 01A 035 B 3",
                  "

pomt

block": "

actual

01A",
                  "

timestamp

row": "

2021-08-30T13:07:48.500Z

035",
                  "

computingtime

bay": "

2021-08-30T13:07:48.500Z

B",
                  "

forecasttime

tier": "3"

}

],

],

"location":

{

"logical

"coordinate": [
                {
                  "pom": "ioutput",
                  "pomt": "actual",
                  "qualifier": "

yard

WGS84",
                  "timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

500Z

419Z",
                  "value":

"Y 01A 035 B 3"

 [
                    4012.22,

"block":

"01A",

 -7500.25

"row": "035"

 ],
                  "

bay

status": "

B

true",
                  "

tier

accuraty": "

3

2.0"
                }
              ]

,

"coordinate":

[

      },
          "end": {
            "time": [

"pom": "ioutput",

    {
                "

pomt

pom": "

actual

output",

qualifier

pomt": "

WGS84

actual",

"timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

500Z

419Z"

,

"value":

[

],

4012.22,

"location": {

-7500.25

 "logical": [

],

{
                  "

status

pom": "

true

ioutput",
                  "

accuraty

pomt": "

2.0

actual",

}

  "qualifier": "yard",

]

}

"timestamp": "2021-09-29T13:28:37.419Z",

},

end

value":

{

"Y 01A 035 B 3",

"time":

[

"status": true,

{

pom

block": "

output

01A",
                  "

pomt

row": "

actual

035",
                  "

timestamp

bay":

"2021-08-30T13:07:48.500Z"

"0",
                  "tier": "0"

}

],

"location": {

 ],
              "

logical

coordinate": [
                {
                  "pom": "ioutput",
                  "pomt": "actual",
                  "qualifier": "

yard

WGS84",
                  "timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

500Z

419Z",
                  "value":

"Y 01A 035 B 3"

[
                    4012.22,

"status":

true,

 -7500.25

"block": "01A"

 ],
                  "

row

status": "

035

true",
                  "

bay

accuraty": "2.0"

,

"tier": "0"

]
            }

}

},

],

 "laden": {
            "

coordinate

start":

[

{
              "time": [

{

"pom":

"ioutput",

pomt

pom": "

actual

output",
                  "

qualifier

pomt": "

WGS84

actual",
                  "timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

500Z",

419Z"
                }

"value":

[

],

4012.22,

"location": {
                "logical": [

-7500.25

],

status

pom": "

true

ioutput",
                    "

accuraty

pomt": "

2.0

actual"

}

]

     "qualifier": "yard",

}

},

   "timestamp": "2021-09-29T13:28:37.419Z",

"laden":

{

start

value":

{

"Y 01A 035 B 3",

"time":

[

         "status": true,

{

pom

block": "

output

01A",
                    "

pomt

row": "

actual

035",
                    "

timestamp

bay": "

2021-08-30T13:07:48.500Z"

B",

}

"tier": "3"
                  }

],

"location": {

 ],
                "

logical

coordinate": [
                  {
                    "pom": "ioutput",
                    "pomt": "actual",
                    "qualifier": "

yard

WGS84",
                    "timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

500Z

419Z",
                    "value":

"Y 01A 035 B 3"

 [
                      4012.22,

"status":

true,

 -7500.25

"block": "01A"

 ],
                    "

row

status":

"035"

true,
                    "

bay

accuraty": "

B",

2.0"
                  }

"tier":

"3"

    ]
              }
            }

],

       },
          "

coordinate

active/on": {

[

       "status": [

{

    {
                "pom": "ioutput",


                "pomt": "actual",

qualifier

timestamp": "

WGS84

2021-09-29T13:28:37.419Z",

timestamp

value":

"2021-08-30T13:07:48.500Z",

false
              }

"value":

[

      ],
            "duration": [

4012.22,

-7500.25

      "pom": "ioutput",

],

   "pomt": "actual",
                "

status

unit":

true,

"second",

accuraty

timestamp": "

2.0"

2021-09-29T13:28:37.419Z",

}

     "value": 0

]

}

],

}

  "counter": [

},

"active/on":

{

            "pom": "

status

ioutput"

:

[

{

"pomt": "actual",
                "

pom

timestamp": "

ioutput

2021-09-29T13:28:37.419Z",
                "

pomt

value":

"actual"

0,
                "

timestamp

starttimestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

500Z

419Z",
                "

value

endtimestamp":

false

"2021-09-29T13:28:37.419Z"
              }
            ],
            "

duration

totalcounter": [

{

"pom": "ioutput",

 {
                "

pomt

pom": "

actual

ioutput",
                "

unit

pomt": "

second

actual",
                "timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

500Z

counter

timer": [
              {
                "pom": "ioutput",
                "pomt": "actual",
                "unit": "second",
                "timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

500Z

419Z",
                "value": 0,
                "starttimestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

500Z

419Z",
                "endtimestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

500Z

totalcounter

totaltimer": [
              {
                "pom": "ioutput",
                "pomt": "actual",
                "

timestamp

unit": "

2021-08-30T13:07:48.500Z

hour",
                "

value

timestamp":

0

"2021-09-29T13:28:37.420Z",

}

    "value": 0

],

"timer":

[

{

},
          "

pom

inactive/off":

"ioutput",

pomt

status":

"actual",

"unit": "second",

timestamp

pom": "

2021-08-30T13:07:48.501Z

ioutput",
                "

value

pomt":

0

"actual",
                "

starttimestamp

timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

501Z

420Z",
                "

endtimestamp

value":

"2021-08-30T13:07:48.501Z"

totaltimer

duration": [
              {
                "pom": "ioutput",
                "pomt": "actual",
                "unit": "

hour

second",
                "timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

501Z

420Z",
                "value": 0
              }
            ],

},

"counter": [

"inactive/off":

 {
                "

status

pom":

[

"ioutput",

{

"pomt": "actual",
                "

pom

timestamp": "

ioutput

2021-09-29T13:28:37.420Z",
                "

pomt

value":

"actual"

0,
                "

timestamp

starttimestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

501Z

420Z",
                "

value

endtimestamp":

false

"2021-09-29T13:28:37.420Z"
              }
            ],
            "

duration

totalcounter": [

{ "pom": "ioutput",

  {
                "

pomt

pom": "

actual

ioutput",
                "

unit

pomt": "

second

actual",
                "timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

501Z

counter

timer": [
              {
                "pom": "ioutput",
                "pomt": "actual",
                "unit": "second",
                "timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

501Z

420Z",
                "value": 0,
                "starttimestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

501Z

420Z",
                "endtimestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

501Z

totalcounter

totaltimer": [
              {
                "pom": "ioutput",
                "pomt": "actual",
                "

timestamp

unit": "

2021-08-30T13:07:48.501Z

hour",
                "

value": 0

timestamp": "2021-09-29T13:28:37.420Z",

}

 "value": 0

],

"timer":

[

{

},

pom

idle/free":

"ioutput",

pomt

status":

"actual",

"unit": "second",

timestamp

pom": "

2021-08-30T13:07:48.501Z

ioutput",
                "

value

pomt":

0

"actual",
                "

starttimestamp

timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

501Z

420Z",
                "

endtimestamp

value":

"2021-08-30T13:07:48.501Z"

totaltimer

duration": [
              {
                "pom": "ioutput",
                "pomt": "actual",
                "unit": "

hour

second",
                "timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

501Z

420Z",
                "value": 0
              }
            ],
            "counter": [

},

"idle/free":

 {
                "

status

pom":

[

 "ioutput",

{

"pomt": "actual",
                "

pom

timestamp": "

ioutput

2021-09-29T13:28:37.420Z",
                "

pomt

value":

"actual"

0,
                "

timestamp

starttimestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

501Z

420Z",
                "

value

endtimestamp":

false

"2021-09-29T13:28:37.420Z"
              }
            ],
            "

duration

totalcounter": [

{

"pom": "ioutput",

 {
                "

pomt

pom": "

actual

ioutput",
                "

unit

pomt": "

second

actual",
                "timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

501Z

counter

timer": [
              {
                "pom": "ioutput",
                "pomt": "actual",
                "unit": "second",
                "timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

501Z

420Z",
                "value": 0,
                "starttimestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

501Z

420Z",
                "endtimestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

501Z

totalcounter

totaltimer": [
              {
                "pom": "ioutput",
                "pomt": "actual",
                "

timestamp

unit": "

2021-08-30T13:07:48.502Z

hour",
                "

value": 0

timestamp": "2021-09-29T13:28:37.420Z",

}

 "value": 0

],

"timer":

[

{

},

"pom

"working/busy":

"ioutput",

pomt

status":

"actual",

[
              {

"unit":

"second",

timestamp

pom": "

2021-08-30T13:07:48.502Z

ioutput",
                "

value

pomt":

0

"actual",
                "

starttimestamp

timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

502Z

420Z",
                "

endtimestamp

value":

"2021-08-30T13:07:48.502Z"

totaltimer

duration": [
              {
                "pom": "ioutput",
                "pomt": "actual",
                "unit": "

hour

second",
                "timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

502Z

420Z",
                "value": 0
              }
            ]

}

"working/busy": {

"status

"counter": [
              {
                "pom": "ioutput",
                "pomt": "actual",
                "timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

502Z

420Z",
                "value":

false

 0,
                "starttimestamp": "2021-09-29T13:28:37.420Z",

}

 "endtimestamp": "2021-09-29T13:28:37.420Z"

],

"duration":

[

],

{

 "totalcounter": [

"pom": "ioutput",

{
                "

pomt

pom": "

actual

ioutput",
                "

unit

pomt": "

second

actual",
                "timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

502Z

counter

timer": [
              {
                "pom": "ioutput",
                "pomt": "actual",
                "unit": "second",
                "timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

502Z

420Z",
                "value": 0,
                "starttimestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

502Z

420Z",
                "endtimestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

502Z

420Z"
              }
            ],
            "totaltimer": [

],

"totalcounter":

[

{

"pom": "ioutput",
                "

pom

pomt": "

ioutput

actual",
                "

pomt

unit": "

actual

hour",
                "timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

502Z

420Z",
                "value": 0
              }
            ]

,


          },
          "

timer

cargo": [

pom

timestamp": "

ioutput

2021-09-29T13:28:37.420Z",

pomt

id": "

actual

ISO 6346"

,

"unit":

"second",

      ],
          "

timestamp

cargovisit":

"2021-08-30T13:07:48.502Z",

"value":

0,

  {
              "

starttimestamp

timestamp": "2021-

08

09-

30T13

29T13:

07

28:

48

37.

502Z

420Z",

endtimestamp

id": "

2021-08-30T13:07:48.502Z

],

totaltimer

carrier": [

pom

timestamp": "

ioutput

2021-09-29T13:28:37.420Z",

pomt

id": "

actual

,

"unit":

"hour",

      ],
          "

timestamp

carriervisit":

"2021-08-30T13:07:48.502Z",

 [
            {
              "timestamp":

"value": 0

"2021-09-29T13:28:37.420Z",

}

"id": ""

]

}

TIC Description

TOS.CYCLE

tos.jobinstruction.cycle pending 2022.003 release.

tos.terminal.cycle pending 2022.003 release.

DATA MODEL

Link to one or more operational processes

M

Any CHE load or discharge operationAll cargo operation is related to cycle.

TIC Description

Search tags

M

Technical

Version / Date

M

TIC_Q3_2021.002 / 2719.0810.2021

Technical

Internal TIC Version

M

definition technical groupReviewed

Technical

M = Mandatory

O = Optional

Diagrams

Info
(optional) add some process diagram which concept belongs

“Basic” CHE Cycle process

...

Draws

Info
(optional) add some draws to explain the concept